LIGHTLEAD Photoluminescent Plastic Pellets are particularly for certain resins such as PP, PE , PMMA, PC, etc. By injection, extrusion and blowing molding, you can use photoluminescent plastic pellets directly to make luminous plastic products. Our standard percentage of the photoluminescent pigment in the photoluminescent plastic pellets is 25% and 50%. The brightness and afterglow time of your finished products could be adjusted by yourself by adding more resins into the compounds. In order to make your photoluminescent finished products get various colors, you can choose photoluminescent pigment in different colors. Otherwise, you can also use dyes/pigment to colorize it. But the dyes/pigment can definitely affect the brightness and afterglow time of the finished products. One with higher brightness and use light color dyes/pigment to minimize the loss of t he brightness.
Many customers like to use photoluminescent pigment directly. Some of them found that there is blacken phenomenon. If you have fewer knowledge of photoluminescent pigment, this blacken phenomenon is hard to solve. Finally, the appearance of the finished plastic products looks not very good. The photoluminescent plastic pellets and masterbatch could help you overcome this difficulty.
The photoluminescent pigment is in powder form but the photoluminescent plastic pellets and masterbatch are in granule form. LIGHTLEAD Photoluminescent Plastic Masterbatch is more easy to use in plastic production.